Interlogix NS3500-28T-4S User Manual - Manual (Page 288)

288
Figure 4-9-71 Storm Control Setting Page Screenshot
The page includes the following fields:
Object Description
 Port Select port for this drop down list.

Port State Enable or disable the storm control status for the given storm type.
 Action Configures the action performed when storm control is over rate on a port. Valid
values are Shutdown or Drop.

Type Enable The settings in a particular row apply to the frame type listed here:
 broadcast
 unknown unicast
 unknown multicast

Rate (kbps/pps) Configure the rate for the storm control. The default value is "10,000".
Buttons
: Click to apply changes.