Interlogix NS3500-28T-4S User Manual - Manual (Page 121)

121
4.5.6 Port to VLAN
Use the VLAN Static Table to configure port members for the selected VLAN index. This Page allows for adding and
deleting port members of each VLAN. The screen in Figure 4-5-7 appears.
Figure 4-5-7 Port to VLAN Setting Page Screenshot
The page includes the following fields:
Object Description

VLAN ID Select VLAN ID for this drop down list to assign VLAN membership.
 Port The switch port number of the logical port.
 Interface VLAN Mode Display the current interface VLAN mode.
Select VLAN membership for each interface by marking the appropriate radio
button for a port or trunk:
Forbidden: Interface is forbidden from automatically joining the VLAN via
GVRP.
Excluded: Interface is not a member of the VLAN. Packets associated with
this VLAN will not be transmitted by the interface.
Tagged: Interface is a member of the VLAN. All packets transmitted by
the port will be tagged, that is, carry a tag and therefore carry
VLAN or CoS information.
 Membership
Untagged: Interface is a member of the VLAN. All packets transmitted by