Interlogix NS3500-28T-4S User Manual - Manual (Page 129)

129
The page includes the following fields:
Object Description

Port Select Select port for this drop down list to assign protocol VLAN port.
 GVRP Enabled Controls whether GVRP is enabled or disabled on port.
 Registration Mode By default GVRP ports are in normal registration mode. These ports use
GVRP join messages from neighboring switches to prune the VLANs running
across the 802.1Q trunk link. If the device on the other side is not capable of
sending GVRP messages, or if you do not want to allow the switch to prune any
of the VLANs, use the fixed mode. Fixed mode ports will forward for all VLANs
that exist in the switch database. Ports in forbidden mode forward only for
VLAN 1.
 VLAN Creation GVRP can dynamically create VLANs on switches for trunking purposes. By
enabling GVRP dynamic VLAN creation, a switch will add VLANs to its
database when it receives GVRP join messages about VLANs it does not have.
Buttons
: Click to apply changes.
Figure 4-5-16 GVRP Port Status Page Screenshot
The page includes the following fields: