Interlogix NS3500-28T-4S User Manual - Manual (Page 228)

228
switch port or if a supplicant is no longer attached.
 Reauthentication
Period
Determines the period, in seconds, after which a connected client must be
reauthenticated. This is only active if the Reauthentication Enabled checkbox is
checked.
Valid values are in the range 30 to 65535 seconds.
 Quiet Period Sets time to keep silent on supplicant authentication failure.
 Supplicant Period Sets the interval for the supplicant to re-transmit EAP request/identify frame.
 Maximun Request
Retries
The number of times that the switch transmits an EAPOL Request Identity
frame without response before considering entering the Guest VLAN is
adjusted with this setting.
The value can only be changed if the Guest VLAN option is globally enabled.
Buttons
: Click to apply changes.
Figure 4-9-6 802.1X Port Status Page Screenshot