Interlogix NS3500-28T-4S User Manual - Manual (Page 211)

211
4.8.4.1 Ingress Bandwidth Control
This page provides to select the ingress bandwidth preamble. The Ingress Bandwidth Control Setting and Status
screens in Figure 4-8-16 & Figure 4-8-17 appear.
Figure 4-8-16 Ingress Bandwidth Control Settings Page Screenshot
The page includes the following fields:
Object Description
 Port Select port number for this drop down list.
 State Enable or disable the port rate policer. The default value is "Disabled".

Rate (Kbps) Configure the rate for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1000000.
Buttons
: Click to apply changes.
Figure 4-8-17 Ingress Bandwidth Control Status Page Screenshot