Interlogix NS3500-28T-4S User Manual - Manual (Page 307)

307
you can enter a specific IP recedence value. A field for entering a IP
recedence value appears. The allowed range is 0 to 7. A frame that hits
this ACE matches this IP recedence value.
 ICMP Specify the ICMP for this ACE.

Any : No specifc ICMP is specified (destination port status is "don't-care").

List : If you want to filter a specific list with this ACE, you can select a
specific list value.

Protocol ID : If you want to filter a specific protocol ID filter with this ACE,
you can enter a specific protocol ID value. A field for entering a protocol ID
value appears. The allowed range is 0 to 255. A frame that hits this ACE
matches this protocol ID value.
 ICMP Code Specify the ICMP code filter for this ACE.
 Any : No ICMP code filter is specified (ICMP code filter status is
"don't-care").

User Defined : If you want to filter a specific ICMP code filter with this ACE,
you can enter a specific ICMP code value. A field for entering an ICMP
code value appears. The allowed range is 0 to 255. A frame that hits this
ACE matches this ICMP code value.
Buttons
: Click to add ACE list.
Figure 4-10-12 IPv6-based ACE Table Page Screenshot
The page includes the following fields:
Object Description
 ACL Name Display the current ACL name