Interlogix NS3500-28T-4S User Manual - Manual (Page 105)

105
4.4.5 LACP Port Setting
This page is used to configure the LACP port setting. The LACP Port Setting screen in Figure 4-4-10 & Figure 4-4-11
appears.
Figure 4-4-10 LACP Port Setting Page Screenshot
The page includes the following fields:
Object Description
 Port Select Select port number for this drop down list to set LACP port setting.

Priority The Prio controls the priority of the port.
If the LACP partner wants to form a larger group than is supported by this
device then this parameter will control which ports will be active and which
ports will be in a backup role.
Lower number means greater priority.

Timeout The Timeout controls the period between BPDU transmissions.
Short will transmit LACP packets each second, while Long will wait for 30
seconds before sending a LACP packet.
Buttons
: Click to apply changes.