Interlogix NS3500-28T-4S User Manual - Manual (Page 310)

310
 IPv6 ACL Display the current IPv6 ACL

Modify
Click to edit ACL binding table parameter.
Click to delete ACL binding entry.
4.11 MAC Address Table
Switching of frames is based upon the DMAC address contained in the frame. The Managed Switch builds up a table
that maps MAC addresses to switch ports for knowing which ports the frames should go to (based upon the DMAC
address in the frame). This table contains both static and dynamic entries. The static entries are configured by the
network administrator if the administrator wants to do a fixed mapping between the DMAC address and switch ports.
The frames also contain a MAC address (SMAC address), which shows the MAC address of the equipment sending
the frame. The SMAC address is used by the switch to automatically update the MAC table with these dynamic MAC
addresses. Dynamic entries are removed from the MAC table if no frame with the corresponding SMAC address have
been seen after a configurable age time.
4.11.1 Static MAC Setting
The static entries in the MAC table are shown in this table. The MAC table is sorted first by VLAN ID and then by MAC
address. The Static MAC Setting screens in Figure 4-11-1 & Figure 4-11-2 appear.
Figure 4-11-1 Statics MAC Setting Page Screenshot
The page includes the following fields:
Object Description
 MAC Address Physical address associated with this interface.