Interlogix NS3500-28T-4S User Manual - Manual (Page 193)

193
access mode.
Command Usage
 Each profile has only one access mode; either permit or deny.
 When the access mode is set to permit, multicast join reports are processed when a multicast group falls within the
controlled range.
 When the access mode is set to deny, multicast join reports are only processed when the multicast group is not in
the controlled range.
4.7.7.1 Multicast Profile Setting
The Add Profile and Profile Status screens in Figure 4-7-36 & Figure 4-7-37 appear.
Figure 4-7-36 Add Profile Setting Page Screenshot
The page includes the following fields:
Object Description

IP Type Select IPv4 or IPv6 for this drop down list.
 Profile Index Indicates the ID of this particular profile.
 Group from Specifies multicast groups to include in the profile. Specify a multicast group
range by entering a start IP address.
 Group to Specifies multicast groups to include in the profile. Specify a multicast group
range by entering an end IP address.
Sets the access mode of the profile; either permit or deny.  Action
- Permit Multicast join reports are processed when a multicast group
falls within the controlled range.