3 installing the sfp transceiver – Interlogix NS3500-28T-4S User Manual User Manual
Page 25
Advertising
25
Figure 2-1-6
Mounting Managed Switch in a Rack
Step6:
Proceeds with Steps 4 and 5 of session 2.2.1 Desktop Installation to connect the network cabling and supply
power to the Managed Switch.
2.2.3 Installing the SFP transceiver
The sections describe how to insert an SFP transceiver into an SFP slot.
The SFP transceivers are hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP
port without having to power down the Managed Switch, as the
Figure 2-1-7
shows.
Figure 2-1-7
Plug in the SFP transceiver
Approved INTERLOGIX SFP Transceivers
Managed Switch supports both Single mode and Multi-mode SFP transceiver. The following list of approved IFS SFP
transceivers is correct at the time of publication:
Advertising