LINK Systems OmniLink 5000 - Manual (Page 47)

4.29
In order for the job notes to be saved after editing, the current job must be stored. Job storage is described
in Section 4.5.1.
Section 4.8.4 Auxiliary Communications
The AUXILIARY COMM softkey will provide access to communication options. These options include
communication with electronic servo feeds, auxiliary equipment (such as PLCs), a laptop interface for
downloading messages, and a network interface. See the manual pertaining to the particular device that is
connected for communication.
Section 4.8.5 LOGOUT Softkey
Selecting the LOGOUT softkey will remove access control from the current user. If a user has logged in
using the password system, this user will retain access control until the user is logged out. Log out can be
either manual or automatic. A user can be manually logged out by using the LOGOUT Softkey. Automatic
log out is described in Section 3.