KBC Networks ESML8P-PC2 - Manual (Page 103)

Ethernet Switch User Manual
Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 103 of 110 www.kbcnetworks.com
configuration command to
change the shared key
value.
8021x system nasid
[words]
G Use the 802.1x system
nasid global configuration
command to change the
NAS ID
switch(config)# 8021x system nasid
test1
8021x misc quietperiod
[sec.]
G Use the 802.1x misc quiet
period global configuration
command to specify the
quiet period value of the
switch.
Switch(config)# 8021x misc
quietperiod 10
8021x misc txperiod
[sec.]
G Use the 802.1x misc TX
period global configuration
command to set the TX
period.
Switch(config)# 8021x misc txperiod
5
8021x misc supptimeout
[sec.]
G Use the 802.1x misc supp
timeout global
configuration command to
set the supplicant timeout.
Switch(config)# 8021x misc
supptimeout 20
8021x misc servertimeout
[sec.]
G Use the 802.1x misc
server timeout global
configuration command to
set the server timeout.
Switch(config)#8021x misc
servertimeout 20
8021x misc maxrequest
[number]
G Use the 802.1x misc max
request global
configuration command to
set the MAX requests.
Switch(config)# 8021x misc
maxrequest 3
8021x misc reauthperiod
[sec.]
G Use the 802.1x misc
reauth period global
configuration command to
set the reauth period.
Switch(config)# 8021x misc
reauthperiod 3000
8021x portstate
[disable | reject | accept |
authorize]
I Use the 802.1x port state
interface configuration
command to set the state
of the selected port.
Switch(config)#interface fastethernet
3
switch(config-if)#8021x portstate
accept
show 8021x E Displays a summary of the
802.1x properties and also
the port sates.
Switch>show 8021x
no 8021x G Disable 802.1x function switch(config)#no 8021x