Port commands set, Command level description example – KBC Networks ESML8P-PC2 User Manual
Page 93
Ethernet Switch User Manual
Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 93 of 110
www.kbcnetworks.com
Port Commands Set
Command
Level Description
Example
interface fastEthernet
[Portid]
G
Choose the port for
modification.
switch(config)#interface fastEthernet 2
duplex
[full | half]
I
Use the duplex
configuration command
to specify the duplex
mode of operation for
Fast Ethernet.
switch(config)#interface fastEthernet 2
switch(config-if)#duplex full
speed
[10|100|1000|auto]
I
Use the speed
configuration command
to specify the speed
mode of operation for
Fast Ethernet., the speed
can’t be set to 1000 if the
port isn’t a giga port.
switch(config)#interface fastEthernet 2
switch(config-if)#speed 100
no flowcontrol
I
Disable flow control of
interface
switch(config-if)#no flowcontrol
security enable
I
Enable security of
interface
switch(config)#interface fastEthernet 2
switch(config-if)#security enable
no security
I
Disable security of
interface
switch(config)#interface fastEthernet 2
switch(config-if)#no security
bandwidth type all
I
Set interface ingress limit
frame type to “accept all
frame”
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth type all
bandwidth type broadcast-
multicast-flooded-unicast
I
Set interface ingress limit
frame type to “accept
broadcast, multicast, and
flooded unicast frame”
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth type
broadcast-multicast-flooded-unicast
bandwidth type broadcast-
multicast
I
Set interface ingress limit
frame type to “accept
broadcast and multicast
frame”
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth type
broadcast-multicast
bandwidth type broadcast-
only
I
Set interface ingress limit
frame type to “only
accept broadcast frame”
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth type
broadcast-only
bandwidth in
[Value]
I
Set interface input
bandwidth. Rate Range is
from 100 kbps to 102400
kbps or to 256000 kbps
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth in 100