KBC Networks ESML8P-PC2 User Manual

Page 30

Advertising
background image

Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.

Page 30 of 110

www.kbcnetworks.com

IPv4

The IPv4 tab allows users to configure the switch to receive an IP address from DHCP server or

manually fill in IP Address, Subnet Mask, Gateway, IP addresses of the primary and the

secondary DNS servers.

DHCP Client: Enable or disable the DHCP client function. When the DHCP Client

function is enabled, the industrial switch will be assigned an IP address from the

network DHCP server. The default IP address will be replaced by the assigned IP

address on DHCP server. After users click Apply, a popup dialog shows up. It is to

inform the user that when the DHCP client is enabled, the current IP will lose and the

user should find the new IP on the DHCP server

IP Address: Assign the IP address for the switch. With the DHCP Client function

enabled, the switch is configured as a DHCP client and users doesn’t need to assign the

IP address that is assigned by the DHCP server. The default IP is 192.168.16.1 or the

user has to assign an IP address manually when DHCP Client is disabled.

Subnet Mask: Assign the subnet mask to the IP address. If the DHCP Client function

is disabled, the user has to assign the subnet mask manually.

Gateway: Assign the network gateway for the switch. If the DHCP Client function is

disabled, the user has to assign the gateway manually. The default gateway is

192.168.16.254.

DNS1: The abbreviation of Domain Name Server—an Internet service that translates

domain names into IP addresses. The domain name is in alphabetic order, which is easy

to be remembered. The Internet is based on IP address. Therefore, every time you use

a domain name, a DNS service must translate the name into the corresponding IP

address. For example, the domain name

www.net.com

might translate to 192.168.16.1.

DNS2: Backup for DNS1. When DNS1 cannot function, DNS2 will then replace DNS1.

When finished, click Apply for the configuration to take effect.

IP configuration—IPv4

Advertising