KBC Networks ESML8P-PC2 User Manual
Page 29
Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 29 of 110
www.kbcnetworks.com
5.2.2 System Information
Here you can view the system information and assign the system name and location to make
this switch identifiable on your network.
•
System Name: Assign the name of the switch. The maximum length is 64 bytes.
•
System Description: A read-only field displaying the description of the switch.
•
System Location: Assign the switch physical location. The maximum length is 64
bytes.
•
System Contact: Enter the name of contact person or department.
•
Firmware Version: Displays the switch’s firmware version.
•
Kernel Version: Displays the kernel software version.
•
MAC Address: Displays the unique hardware address assigned by manufacturer
(default).
•
Click Apply to have the configuration take effect.
Note:
Don’t set “0” for the first segment of the subnet mask and default gateway
(000.xxx.xxx.xxx).
Refresh the web screen if the web could not be displayed while you change the setting
System Information interface
5.2.3 IP Configuration
Due to the foreseeable address exhaustion of IPv4, the IP configuration of the Ethernet switch
is designed to provide an interface for users to configure the switch running both IPv4 and
IPv6 architecture.