KBC Networks ESML8P-PC2 - Manual (Page 91)

Ethernet Switch User Manual
Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 91 of 110 www.kbcnetworks.com
System Commands Set
Command Level Description Example
show config E Show switch
configuration
switch>show config
show terminal P Show console information switch#show terminal
write memory P Save user configuration
into permanent memory
(flash rom)
switch#write memory
system name
[System Name]
G Configure system name switch(config)#system name xxx
system location
[System Location]
G Set switch system
location string
switch(config)#system location xxx
system description
[System Description]
G Set switch system
description string
switch(config)#system description xxx
system contact
[System Contact]
G Set switch system
contact window string
switch(config)#system contact xxx
show system-info E Show system information switch>show system-info
ip address
[Ip-address] [Subnet-
mask] [Gateway]
G Configure the IP address
of switch
switch(config)#ip address 192.168.1.1
255.255.255.0 192.168.1.254
ip dhcp G Enable DHCP client
function of switch
switch(config)#ip dhcp
show ip P Show IP information of
switch
switch#show ip
no ip dhcp G Disable DHCP client
function of switch
switch(config)#no ip dhcp
reload G Halt and perform a cold
restart
switch(config)#reload
default G Restore to default switch(config)#default
admin username
[Username]
G Changes a login
username.
(maximum 10 words)
switch(config)#admin username xxxxxx
admin password
[Password]
G Specifies a password
(maximum 10 words)
switch(config)#admin password xxxxxx
show admin P Show administrator
information
switch#show admin
dhcpserver enable G Enable DHCP Server switch(config)#dhcpserver enable
Dhcpserver disable G Disable DHCP Server switch(config)#no dhcpserver
dhcpserver lowip
[Low IP]
G Configure low IP address
for IP pool
switch(config)#dhcpserver lowip
192.168.1.100