KBC Networks ESML8P-PC2 User Manual
Page 52
Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 52 of 110
www.kbcnetworks.com
State Activity
Having configured the LACP aggregator on the Aggregator Setting tab, you may want to
change the state activity for the members of the LACP trunk group. You can tick/untick the
checkbox beside the state label. If you remove the tick mark of the corresponding port and click
the Apply button, the port state activity will change to Passive.
•
Active: The port automatically sends LACP protocol packets.
•
Passive: The port does not actively send LACP protocol packets. It responds only if it
receives LACP protocol packets from the opposite device.
Note:
A link having two passive LACP nodes will not perform dynamic LACP trunk because both
ports are waiting for an LACP protocol packet from the opposite device.
State Activity of Switch 1
State Activity of Switch 2