KBC Networks ESML8P-PC2 - Manual (Page 42)

Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 42 of 110 www.kbcnetworks.com
• SNTP Sever URL: Specify the SNTP server IP address. You can assign a local network
time server IP address or an internet time server IP address.
• Switch Timer: When the switch has successfully connected to the SNTP server whose IP
address was assigned in the field of SNTP Server URL, the current coordinated time is
displayed here.
• Daylight Saving Period: Set up the start and end date/time of the daylight saving
period. Please key in the value in the format of ‘YYYYMMDD’ and ‘HH:MM’ (leave a space
between ‘YYYYMMDD’ and ‘HH:MM’).
- YYYYMMDD: an eight-digit year/month/day specification.
- HH:MM: a five-digit (including a colon mark) hour/minute specification.
For example, key in ‘20070701 02:00’ and ‘20071104 02:00’ in the two fields respectively
to represent that DST begins at 2:00 a.m. on March 11, 2007 and ends at 2:00 a.m. on
November 4, 2007.
• Daylight Saving Offset (mins): For non-US and European countries, specify the amount
of time for day light savings. Please key in the valid figure in the range of minute between
0 and 720, which means you can set the offset up to 12 hours.
• Synchronization Interval (secs): The Synchronization Interval is used for sending
synchronizing packets periodically. Users can assign the time ranging from 64 to 1024
seconds. The “0” value displaying by default means that you disable the auto-
synchronized feature in the SNTP client mode. You can enable the feature by filling the
interval range from 64~1024 seconds.
• Click Apply to have the configuration take effect.
SNTP Configuration interface