KBC Networks ESML8P-PC2 - Manual (Page 54)

Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 54 of 110 www.kbcnetworks.com
5.2.15 Rate Limiting
You can respectively configure the ingress limitation type and ingress/egress rate for each port.
• Ingress Limit Frame Type: Select the limit type for ingress frames. Four options are
available as follows:
- All
- Broadcast/Multicast/Flooded Unicast
- Broadcast/Multicast
- Broadcast only
The egress rate will limit all types of frame.
Rate Limiting interface
• Click the Ingress/Egress pull-down menus to select the bandwidth limit.
• When finished, click Apply to have the configuration take effect.