KBC Networks ESML8P-PC2 User Manual
Page 32
Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 32 of 110
www.kbcnetworks.com
•
High IP Address: Type in an IP address as the beginning of a range of the dynamic IP
address. As the figure shown below, for example, 192.168.16.200 is the relatively high
IP address of the range.
•
Subnet Mask: Type in the subnet mask of the IP configuration.
•
Gateway: Type in the IP address of the gateway in your network.
•
DNS: Type in the IP address of Domain Name Server in your network.
•
Lease Time (sec): The length of time the dynamic IP addresses assigned to clients.
•
Click Apply for the configuration to take effect.
DHCP Server—System Configuration interface
Client Entries
When the DHCP Server function is enabled, the system will collect the DHCP client
information including the assigned IP address, the MAC address of the client device, the IP
assigning type, states and lease time.
DHCP Client Entries interface