KBC Networks ESML8P-PC2 - Manual (Page 105)

Ethernet Switch User Manual
Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 105 of 110 www.kbcnetworks.com
smtp rcptemail
[Index] [Email address]
G Configure Rcpt e-mail
Address
switch(config)#smtp rcptemail 1
[email protected]
show smtp P Show the information of
SMTP
switch#show smtp
no smtp G Disable SMTP function switch(config)#no smtp
event device-cold-start
[Systemlog|SMTP|Both]
G Set cold start event type switch(config)#event device-cold-
start both
event authentication-
failure
[Systemlog|SMTP|Both]
G Set Authentication failure
event type
switch(config)#event authentication-
failure both
event ring-topology-change
[Systemlog|SMTP|Both]
G Set X-ring topology
changed event type
switch(config)#event ring-topology-
change both
event systemlog
[Link-UP|Link-Down|Both]
I Set port event for system
log
switch(config)#interface fastethernet
3
switch(config-if)#event systemlog
both
event smtp
[Link-UP|Link-Down|Both]
I Set port event for SMTP switch(config)#interface fastethernet
3
switch(config-if)#event smtp both
show event P Show event selection switch#show event
no event device-cold-start G Disable cold start event
type
switch(config)#no event device-cold-
start
no event authentication-
failure
G Disable Authentication
failure event typ
switch(config)#no event
authentication-failure
no event ring-topology-
change
G Disable X-ring topology
changed event type
switch(config)#no event ring-
topology-change
no event systemlog I Disable port event for
system log
switch(config)#interface fastethernet
3
switch(config-if)#no event systemlog
no event smpt I Disable port event for
SMTP
switch(config)#interface fastethernet
3
switch(config-if)#no event smtp
show systemlog P Show system log client &
server information
switch#show systemlog