KBC Networks ESML8P-PC2 - Manual (Page 5)

Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 5 of 110 www.kbcnetworks.com
1 Introduction
This manual covers the ESML8P-PC2 Series. KBC Networks’ ESML8P-PC2, 8 10/100TX + 2
10/100/1000T/Mini-GBIC Combo w/8 PoE Injectors managed industrial switch is a cost-effective
solution that is designed for use in a wide range of operating temperatures in non-
environmentally conditioned, industrial applications. The use of fiber ports can extend connection
distances and increases network flexibility and performance. In addition, the switch provides PoE
for Powered Devices enabling them to receive power and data over an RJ-45 cable.
Hardware Features 1.1
Standards
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX/ FX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit fiber
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Port trunk with LACP
IEEE802.3af Power over Ethernet
IEEE802.1d Spanning Tree/ IEEE802.1w Rapid Spanning Tree
IEEE802.1p Class of Service
IEEE802.1Q VLAN Tag
IEEE 802.1x User Authentication (Radius)
IEEE802.1ab LLDP
Switch Architecture
Back-plane (Switching Fabric): 5.6Gbps
Packet throughput ability(Full-Duplex): 8.3Mpps @64bytes
Transfer Rate
14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Fiber Ethernet port
Packet Buffer 1Mb
MAC Address 8k –entry MAC address table
Flash 4Mbytes
DRAM 32Mbytes
Connectors
10/100TX: 8 x RJ-45
10/100/1000T/ Mini-GBIC combo: 2 x RJ-45 + 2 x
100/1000 SFP sockets
RS-232 connector: RJ-45 type
Network Cable
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable
EIA/TIA-568 100-ohm (100m)
1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable
EIA/TIA-568 100-ohm (100m)
Optical Fiber
Distance:
Multimode:
0 to 5 km, 1300 nm (50/125µm, 800 MHz*km)
0 to 4 km, 1300 nm (62.5/125µm, 500 MHz*km)Singlemode:
0 to 40 km, 1310 nm (9/125µm, 3.5 PS/(nm*km))
0 to 80 km, 1550 nm (9/125µm, 19 PS/(nm*km))
Min. TX Output:
Multimode: -20dBm
Singlemode: 0 to 40 km, -5dBm; 0 to 80 km, -5dBmMax. TX Output:
Singlemode: 0 to 40 km, 0dBm; 0 to 80km, 0dBm