Logging in the console interface – KBC Networks ESML8P-PC2 User Manual
Page 25
Advertising
Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 25 of 110
www.kbcnetworks.com
Logging in the Console Interface
When the connection between the industrial switch and host PC is ready, turn on the PC and then
run a terminal emulation program like Hyper Terminal. On the Port Settings tab, configure the
communication parameters to match the following default characteristics for the console port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
The settings of communication parameters
Advertising