KBC Networks ESML8P-PC2 User Manual
Page 45
Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 45 of 110
www.kbcnetworks.com
5.2.11 Port Statistics
The following chart provides the current statistics information which displays the real-time packet
transfer states for each port. The user might use the information to plan and implement the
network, or check and find the problem when the collision or heavy traffic occurs.
•
Port: Port number indexed.
•
Type: Displays the network media type of the port.
•
Link: The states of linking—‘Up’ or ‘Down’.
•
State: Displays port states set by the Port Control interface. When the state is disabled,
the port will not transmit or receive any packet.
•
Tx Good Packet: Number of transmitting good packets via this port.
•
Tx Bad Packet: Number of transmitting bad packets (including undersize [less than 64
bytes], oversize, CRC Align errors, fragments and jabbers packets) via this port.
•
Rx Good Packet: Number of receiving good packets via this port.
•
Rx Bad Packet: Number of receiving good packets (including undersize [less than 64
bytes], oversize, CRC error, fragments and jabbers) via this port.
•
Tx Abort Packet: Number of aborted packets while transmitting.
•
Packet Collision: Number of packet collision.
•
Packet Dropped: Number of dropped packets.
•
Rx Bcast Packet: Number of broadcast packets.
•
Rx Mcast Packet: Number of multicast packets.
•
Click the Clear button to clear all counts.
Port Statistics interface