KBC Networks ESML8P-PC2 - Manual (Page 27)

Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 27 of 110 www.kbcnetworks.com
Web-based Management 5.2
This industrial switch provides a convenient configuration method via a web browser. Follow the
steps below to access the equipment:
Note: Your host PC should be in the same VLAN setting with the industrial switch, or the
management will not be configured
Connect the industrial switch to the Ethernet, then your host PC can be configured via Ethernet.
Or you can directly connect it to your host PC with a straight-through or cross over Ethernet
cable. Before using web management, install the industrial switch onto the network and make
sure that one of the PCs on the network can connect with the industrial switch through the web
browser. The switch default values of IP, subnet mask, username and password are below:
• IP Address: 192.168.16.1
• Subnet Mask: 255.255.255.0
• Default Gateway: 192.168.16.254
• User Name: root
• Password: root
1. Launch Internet Explorer on the PC.
2. Type the IP address of the switch in the URL field, and then Press “Enter”.
3. With the login dialog box showing up, type the user name and password in the respective
fields. The default user name and password are the same as ‘root’.
4. Press Enter or click the OK button, and then the home screen of the Web-based
management appears. You can change user name/password in the User Authentication
section.
Login dialog box