KBC Networks ESML8P-PC2 User Manual
Page 26
Advertising
Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 26 of 110
www.kbcnetworks.com
Having finished the parameter settings, click ‘OK’. When the blank screen appears, press
‘Enter’ for the login prompt to appear. Key in ‘root’ (default value) for both User Name and
Password (press Enter to switch between); and then press ‘Enter’ for the Main Menu of
console management to appear. See the figure below:
Console login interface
The system supports the console management—CLI command. After you log in on to the
system, you will see a command prompt. To enter CLI management interface, type in
“enable” command.
CLI command interface
For further details about the CLI commands, please refer to Appendix A Command Sets.
Advertising