KLING & FREITAG CON:SEQUENZA+K&F - Manual (Page 27)

User’s Guide K&F CON:SEQUENZA+
KLING & FREITAG GmbH Version 1.0 Seite 27 von 53
Add two Line Arrays pointing towards the two middle floor Audience Zones, as shown in the
picture. You can name them after the zones where they are aimed.
2.11 Editing Line Arrays
In the Top View you can change the location of a Line Array by left-dragging the symbol; or its
orientation by left-dragging the aiming line. You can do the same in the Side View, where you can
also edit the height of the Array and the tilt angle of the single boxes using their aiming lines.