KLING & FREITAG CON:SEQUENZA+K&F - Manual (Page 40)

User’s Guide K&F CON:SEQUENZA+
KLING & FREITAG GmbH Version 1.0 Seite 40 von 53
Place two Line Arrays in front of ”Left” and “Right” Audience Zones, as you did in §2.10 for
the middle Zones, and two for the balcony (see figure). Configure all new Sources. Then
create a group for floor Line Arrays and a group for balcony Line Arrays.
3.9 Audience Area Groups
As explained for Sound Sources in the previous paragraph, Audience Areas can also be hidden
from the mapping. This is especially useful when two Areas are partly overlapping, and one is
hiding the other one’s mapping. Toggling mapping for Areas works just like for Sources: In the
Areas menu in the Mapping Toolbar, you can see a list of all Audience Areas divided by Audience
Zone, and turn single Areas or whole Zones on and off.