Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 155)

Chapter 7
CPCI-6200 Installation and Use (6806800J66E) 155
Control via IPMI
7.1 Standard IPMI Commands
The IPMC is fully compliant to the Intelligent Platform Management Interface v.1.5. This
section provides information on which IPMI commands are supported.
7.1.1 Global IPMI Commands
The IPMC supports the following global IPMI commands.
7.1.2 Watchdog Commands
The watchdog commands are supported by boards providing a system interface and a
watchdog type 2 sensor.
Table 7-1 Supported Global IPMI Commands
Command NetFn (Request/Response) CMD Comments
Get Device ID 0x06/0x07 0x01 -
Master Write-Read 0x06/0x07 0x52 Only for accessing private I 2 C
buses.
Cold Reset 0x06/0x07 0x02 -
Get Selftest Results 0x06/0x07 0x04 -
GetDeviceGUID 0x06/0x07 0x08 -
Table 7-2 Supported Watchdog Commands
Command NetFn (Request/Response) CMD
Reset Watchdog Timer 0x06/0x07 0x22
Set Watchdog Timer 0x06/0x07 0x24
Get Watchdog Timer 0x06/0x07 0x25