Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 156)

Control via IPMI
CPCI-6200 Installation and Use (6806800J66E) 156
7.1.3 IPMI Messaging Commands
The IPMC supports the following IPMI messaging commands.
7.1.4 SEL Device Commands
The IPMC supports the following SEL device commands.
Table 7-3 Supported Watchdog Commands
Command NetFn (Request/Response) CMD
Set BMC Global Enables 0x06/0x07 0x2E
Get BMC Global Enables 0x06/0x07 0x2F
Clear Message Flags 0x06/0x07 0x30
Get Message Flags 0x06/0x07 0x31
Enable Message Channel Receive 0x06/0x07 0x32
Get Message 0x06/0x07 0x33
Send Message 0x06/0x07 0x34
Read Event Message Buffer 0x06/0x07 0x35
Get BT Interface Capabilities 0x06/0x07 0x36
Table 7-4 Supported SEL Device Commands
Command NetFn (Request/Response) CMD
Get SEL Info 0x0A/0x0B 0x40
Get SEL Allocation Info 0x0A/0x0B 0x41
Reserve SEL 0x0A/0x0B 0x42
Get SEL Entry 0x0A/0x0B 0x43
Add SEL Entry 0x0A/0x0B 0x44
Clear SEL 0x0A/0x0B 0x47
Get SEL Time 0x0A/0x0B 0x48
Set SEL Time 0x0A/0x0B 0x49