Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 182)

Control via IPMI
CPCI-6200 Installation and Use (6806800J66E) 182
Table 7-38 VCC5_0 Sensor
Feature Raw Value Description
Sensor Name VCC5_0 -
Sensor LUN 0x00 -
Sensor Number 0x03 -
Entity ID 0x07 -
Sensor Type 0x02 Voltage
Event/Reading Type 0x01 Threshold
Assertion Event Mask(Byte 15) 0x95 -
Assertion Event Mask(Byte 16) 0x7A -
Deassertion Event Mask(Byte 17) 0x95 -
Deassertion Event Mask(Byte 18) 0x7A -
Threshold Mask(Byte 19) 0x3F -
Threshold Mask(Byte 20) 0x3F -
Base Unit 0x04 Volt
Nominal Reading 0xAC 5.00
Upper non-recoverable threshold 0xBD 5.50
Upper critical threshold 0xB8 5.35
Upper non-critical threshold 0xB4 5.23
Lower non-recoverable threshold 0x9B 4.50
Lower critical threshold 0x9F 4.62
Lower non-critical threshold 0xA3 4.74
Rearm mode 0x01 Auto
Hysteresis Support 0x03 Readable and Setable
Threshold Access Support 0x03 Readable and Setable
Event Message Control 0x00 Per Threshold / Discrete State
Reading Definition Analog reading byte Analog sensor reading