Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 179)

Control via IPMI
CPCI-6200 Installation and Use (6806800J66E) 179
Table 7-35 VCC1_8 Sensor
Feature Raw Value Description
Sensor Name VCC1_8 -
Sensor LUN 0x00 -
Sensor Number 0x01 -
Entity ID 0x07 -
Sensor Type 0x02 Voltage
Event/Reading Type 0x01 Threshold
Assertion Event Mask(Byte 15) 0x95 -
Assertion Event Mask(Byte 16) 0x7A -
Deassertion Event Mask(Byte 17) 0x95 -
Deassertion Event Mask(Byte 18) 0x7A -
Threshold Mask(Byte 19) 0x3F -
Threshold Mask(Byte 20) 0x3F -
Base Unit 0x04 Volt
Nominal Reading 0xB8 1.8
Upper non-recoverable threshold 0xCA 1.98
Upper critical threshold 0xC5 1.93
Upper non-critical threshold 0xC1 1.89
Lower non-recoverable threshold 0xA6 1.62
Lower critical threshold 0xAA 1.67
Lower non-critical threshold 0xAF 1.71
Rearm mode 0x01 Auto
Hysteresis Support 0x03 Readable and Setable
Threshold Access Support 0x03 Readable and Setable
Event Message Control 0x00 Per Threshold / Discrete State
Reading Definition Analog reading byte Analog sensor reading