Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 172)

Control via IPMI
CPCI-6200 Installation and Use (6806800J66E) 172
Threshold Mask(Byte 20) 0x00 -
Base Unit 0x00 (unspecified)
Rearm mode 0x01 Auto
Hysteresis Support 0x00 No Hysteresis or unspecified
Threshold Access Support 0x00 No Tresholds
Event Message Control 0x00 Per Threshold / Discrete State
Reading Definition - -
Table 7-28 Ejector Switch Sensor
Feature Raw Value Description
Sensor Name Ejector Switch -
Sensor LUN 0x00 -
Sensor Number 0x80 -
Entity ID 0x07 -
Sensor Type 0xD2 Artesyn-specific Discrete Digital
Event/Reading Type 0x6F Discrete (sensor-specific)
Assertion Event Mask(Byte 15) 0x01 -
Assertion Event Mask(Byte 16) 0x00 -
Deassertion Event Mask(Byte 17) 0x01 -
Deassertion Event Mask(Byte 18) 0x00 -
Threshold Mask(Byte 19) 0x01 -
Threshold Mask(Byte 20) 0x00 -
Base Unit 0x00 (unspecified)
Rearm mode 0x01 Auto
Hysteresis Support 0x00 No Hysteresis or unspecified
Threshold Access Support 0x00 No Tresholds
Event Message Control 0x00 Per Threshold / Discrete State
Table 7-27 Critical IRQ Sensor (continued)
Feature Raw Value Description