Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 180)

Control via IPMI
CPCI-6200 Installation and Use (6806800J66E) 180
Table 7-36 VCC3_3 Sensor
Feature Raw Value Description
Sensor Name VCC3_3 -
Sensor LUN 0x00 -
Sensor Number 0x02 -
Entity ID 0x07 -
Sensor Type 0x02 Voltage
Event/Reading Type 0x01 Threshold
Assertion Event Mask(Byte 15) 0x95 -
Assertion Event Mask(Byte 16) 0x7A -
Deassertion Event Mask(Byte 17) 0x95 -
Deassertion Event Mask(Byte 18) 0x7A -
Threshold Mask(Byte 19) 0x3F -
Threshold Mask(Byte 20) 0x3F -
Base Unit 0x04 Volt
Nominal Reading 0xA4 3.3
Upper non-recoverable threshold 0xB4 3.63
Upper critical threshold 0xB0 3.54
Upper non-critical threshold 0xAC 3.46
Lower non-recoverable threshold 0x94 2.97
Lower critical threshold 0x98 3.06
Lower non-critical threshold 0x9C 3.14
Rearm mode 0x01 Auto
Hysteresis Support 0x03 Readable and Setable
Threshold Access Support 0x03 Readable and Setable
Event Message Control 0x00 Per Threshold / Discrete State
Reading Definition Analog reading byte Analog sensor reading