Basler Electric BE1-851 - Manual (Page 5)

REVISION HISTORY
The following information provides a historical summary of the changes made to this instruction manual
(9289900990), BESTCOMS software, application firmware, and hardware of the BE1-851.
Manual
Revision and Date
Change
R, 02/14 • Removed Registration of Relay from Section 12.
Q • This revision letter not used.
P, 02/13 • Re-organized Operational Specifications and listed functions in
numerical order in Section 1.
• Moved Real-Time Clock from Operational Specifications to General
Specifications in Section 1.
• Updated contact-sensing inputs specifications in Sections 1, 3, and 12.
• Added Table 1-1, Contact-Sensing Turn-On Voltages.
• Added Figure 6-9, Trip Detector Circuit and Table 6-9, Current Draw.
• Added Updating Insertion Guide in S1 Case to Section 12.
• Changed all instances of BESTWAVEPlus to BESTwave.
O • This revision letter not used.
N, 10/09 • Updated Contact Sensing Input ranges and burden data for re-designed
contact sense circuit.
• Added Storage in Section 13.
• Changed all instances of BESTWAVE to BESTWAVEPlus™.
• Minor text edits throughout manual.
M, 02/08 • Added “V” and “W” to Option 1 in Style Chart. These options add 262
and 362 timers and remove 243 and 343 virtual switches. Updated
manual with information on these changes.
• Added Settings Compare to Section 6, Reporting and Alarm Functions.
• Added Alternate DST (Daylight Saving Time) settings/commands to
Sections 6, 11 and Appendix B.
L, 12/06 • Updated front panel drawings throughout manual.
• Added adapter bracket drawings, Figures 12-11 and 12-12.
• Added CE statement in Section 1, General Information.
• Updated output contact ratings in Section 1.
• Added style number and firmware version to fault reports.
K, 03/06 • Removed Relay Settings Records Appendix.
• Added examples to ASCII commands in Section 11.
• Added GOST-R Certification to Section 1.
• Added “E”, “G”, and “R” to Case options in style number. (N.O. Alarm
Output contacts.)
J, 06/05 • Updated Figure 10-5 to show new Fault screens for “G” style relays.
• Added “Data Dump” to rear RS-232 port for “G” style relays.
• Enhanced 62/162 function to support up to 9,999 seconds.
• Updated BESTCOMS screen images.
I • This revision letter not used.
9289900990 Rev R BE1-851 Introduction iii