Basler Electric BE1-851 - Manual (Page 7)

BESTCOMS™ Software
Version and Date
Change
2.05.00, 03/06 • Added “E”, “G”, and “R” to Case options in Style Chart Drawing.
• Added Settings Compare feature.
• Improved Printer Setup feature.
• Improved View/Download Relay Fault Files screen.
• Added enable/disable feature for Automatic Output of ASCII Fault
Reports to Communication tab on General Operation screen. (“H”
version.)
2.04.00, 06/05 • Added enable/disable feature for Automatic Output of ASCII Fault
Reports to Communication tab on General Operation screen. (“G”
version.)
2.03.00, 11/04 • Updated 62/162 Logic Timers to support up to 9,999 seconds.
• Re-arranged the Global Security tab in the General Operation screen.
• Updated the Input Labels and Virtual Switch Labels along with
printouts.
• An opened Settings File is now added to the Recent Files List.
• BESTCOMS now works with USB to RS-232 and Ethernet to RS-232
converters.
2.02.00, 06/03 • Improved printing.
2.01.01, 10/02 • Added an error message when virtual test switches, inputs, and outputs
are left blank.
2.00.00, 11/01 • Initial release of 32-bit version.
1.32.01, 03/00 • Added support for version 3 hardware.
1.01.01, 10/97 • Initial release of 16-bit version.
Application Firmware
Version and Date
Change
4.48.04, 05/09 • Added alternate DST (Daylight Saving Time) settings.
• Improved x62 timer when changing settings groups.
• Increased immunity to noise on IRIG input.
• Increased immunity to noise when communicating via Modbus.
4.48.03, 09/06 • Added SG-DATADUMP command to cause the fault report information
to be automatically output to COM1. (“H” version”.)
• Enhanced the HMI to show Fault Report data on Screen 4.1.1. (“H”
version.)
• Added style number and firmware version to fault reports.
• Minor firmware improvements.
4.48.02, 06/05
3.48.02, 06/05
2.48.02, 06/05
• Added SG-DATADUMP command to cause the fault report information
to be automatically output to COM1. (“G” version.)
• Enhanced the HMI to show Fault Report data on Screen 4.1.1. (“G”
version.)
4.46.02, 09/04
3.46.02, 09/04
2.45.02, 09/04
• Added DNP commands. (4.46.02 & 3.46.02 only.)
• Improved performance of the 62 function to support time delays up to
9,999 seconds.
• Enhanced performance of the 79 function.
3.45.00, 06/03 • Enabled target reset through Modbus.
9289900990 Rev R BE1-851 Introduction v