Gasboy Fleet Head Office System - Manual (Page 172)

170
7.10.1. Creating a New Device
To add a new authorizer device, perform the following instructions:
1. Click on the New button on the Devices screen
2. The Device Properties window appears (see Figure 7-31)
Figure 7-31. Device Properties Screen – General Tab
3. The Device Properties window consists of five tabs, as described in the following
paragraphs
7.10.1.1. New Device – General Tab
1. Select the type of the device:
• Vehicle Mounted: for devices mounted inside the vehicle (e.g.: VIU, FuelPoint
PLUS)
• Handheld:
a. Vehicle Identification: for devices, which enable automatic refueling, and
are not installed in a specific vehicle (e.g.: smart tags, magnetic cards)
b. Station Employee: select this option if defining a gas station attendant
authorizer (applicable only to the station)
FMS and FHO User’s Manual - MDE-4821