Gasboy Fleet Head Office System - Manual (Page 359)

357
Figure 14-4. WP Tunnel Setup Wizard Connection Settings Screen
5. Enter the
Head Office IP Address. In the example above, WP Tunnel is installed in FHO PC, so
the local Host IP address (127.0.0.1) is entered
6. Enter the
Serial Com port to which the WP device is to be connected. Click Next
NOTE
The FTP stores updated vehicle lists required for
WP proper functioning. Default FTP address:
194.90.151.28 should not be changed.
7. The installation process is fully automated. The Installing screen displays process messages, as
well as possible error messages. At the end of the process, click
Close to exit the Wizard (see
Figure 14-5)
FMS and FHO User’s Manual - MDE-4821