Gasboy Fleet Head Office System - Manual (Page 91)

89
6.4.5. Alarms Tab
To open the Alarms screen, select the Alarm tab (see Figure 6-8).
The Alarms Management screen enables users to define the alarm attributes. The types of alarms
are predetermined in the system, and they are listed in the Alarm Code column by ascending
number. The administrator can only change their attributes.
To change an alarm
attributes, first select the alarm by clicking on the corresponding row. The
selected alarm attributes are shown in the selection boxes (along with its name in the left box). Set
the attributes from the drop-down lists:
• Priority: Select from Journal to Urgent (5 selections)
• Enable: Yes or No (to Disable an alarm)
• Audio: Select from No Audio to Attention (6 selections)
Click
Update to apply the selections. Verify that the new attributes are displayed on the alarm's
corresponding row.
Figure 6-8. Setup Screen – Alarms Tab
FMS and FHO User’s Manual - MDE-4821