NavCom SF-3050 Rev.B - Manual (Page 101)

SF-3050 User Guide – Rev B
4-99
Chapter 4 .................................Installation
This chapter provides guidance on hardware
installation for optimum performance.
Antennae
The 5/8 inch BSW threaded antenna mount has a
depth of 16mm (0.63 inch).
It is possible to remove the 5/8 inch BSW threaded
alloy insert to reveal a secondary means of mounting
the antenna, a 1-14UNS-2B thread with a depth of
16mm (0.63 inch). This is a typical marine industry
mount for navigation antennas.
The BSW insert is secured in-place with an
adhesive, and its removal will change the
shock and vibration sustainability
characteristics of the antenna mount.
Figure 63: Rover, Base, Airborne GNSS Antennae
Do not loosen or remove the Phillips screws
on the base of the antenna for mounting
purposes. This will VOID the warranty and
compromise the environmental seal of the
antenna, leading to internal damage.