NavCom SF-3050 Rev.B - Manual (Page 131)

SF-3050 User Guide – Rev B
software bundles G and S. 25Hz is the default
PVT and Raw Data Rate for bundle M.
Data Latency and Memory
1
Not available for v1.0 software.
PVT: < 10 ms
Raw Data: < 10 ms
Internal Memory
1
2 GB
1PPS
Accuracy: +13 ns (Relative; User Configurable)
Connector Assignments
ANT: TNC (female)
RF Input, RF Ground
COM 1 – LAN: Positronic (female)
RS-232, from 9.6 to 115.2kbps
Ethernet, from 10 to 100Mbps
1PPS
COM 2 – USB: Positronic (female)
RS-232/RS-422, from 9.6 to 115.2kbps
USB 2.0, 12Mbps max data rate
POWER: Positronic (male)
Power port, from 9 to 32 VDC, 6W typical,
Power Input 1,2; Power Ground
1PPS / Event Marker
Bluetooth: 1 Serial Port Service, 230.4kbps
10m (32 ft) range

By default, the two female Positronic ports are
available for command inputs and data
input/output. Refer to Chapter 3 Interfacing for
I/O connector pin assignments.
A-129