A gnss module specifications, Features, Gnss module specifications – NavCom SF-3050 Rev.B User Manual

Page 125: A..................gnss module specifications

Advertising
background image

SF-3050 User Guide – Rev B

A..................GNSS Module Specifications

The technical specifications of this unit are detailed
below. NavCom Technology, Inc. is constantly
improving, and updating our technology. For the
latest technical specifications for all products go to:

http://www.navcomtech.com/Support/

This GNSS sensor is fitted with an internal Lithium
cell battery used to maintain GNSS time when power
is removed from the unit. This allows faster satellite
acquisition upon unit power up. The cell has been
designed to meet over 5 years of service life before
requiring replacement at a NavCom approved
maintenance facility.

Features

 Full constellation coverage with up to 66 signals

tracked simultaneously, plus the StarFire channel

 SBAS (WAAS, EGNOS, MSAS, GAGAN) tracking

 Built in StarFire receiver and demodulator

 L1, L2, L2C, L5, G1, G2, E1, E5A (GPS/Galileo/

GLONASS) code and full wavelength carrier
phase tracking

 Software upgradeable for Galileo signal reception

(E1, E5A)

1

 High sensitivity / low signal level tracking

 Fast acquisition / re-acquisition

 Superior interference suppression (both in-band

& out-of-band)

 Patented multipath rejection

1

The SF-3050 is hardware ready for Galileo.

Software capability will follow in a later release.

A-123

Advertising
This manual is related to the following products: