NavCom SF-3050 Rev.B - Manual (Page 64)

SF-3050 User Guide – Rev B
RTK Extend is a unique patented technique, not
available on any other manufacturer’s receivers.
 Data
Sampling
GPS (L1, L2, L2C, L5), GLONASS (G1, G2), Galileo
(E1, E5a), and SBAS (WAAS, EGNOS, MSAS,
GAGAN) raw measurement data is up to 5Hz in the
standard configuration for the SF-3050G and
SF-3050S. An optional upgrade allows 10, 25, 50,
and 100Hz raw measurement data via high speed
ports.
For the SF-3050M, the raw measurement data is up
to 25Hz in the standard configuration, with the
optional upgrade of 50 and 100Hz.
The PVT (Position, Velocity, & Time) data is output at
up to 5Hz in the standard configuration for the
SF-3050G and SF-3050S. An optional upgrade
allows 10, 25, 50, and 100Hz position updates for
highly dynamic applications.
For the SF-3050M, the PVT data is output at up to
25Hz in the standard configuration, with the optional
upgrade of 50 and 100Hz.
 GNSS
Performance
The SF-3050 utilizes NavCom’s Sapphire GNSS
engine, which incorporates several patented
innovations. Sapphire’s industry leading receiver
sensitivity provides more than 50% signal to noise
ratio advantage over competing technologies. This
results in improved real time positioning, proven
through independent tests, when facing various
multipath environments.
 Rugged
Design
Units have been tested to conform to MIL-STD-810F
for low pressure, solar radiation, rain, humidity,
salt-fog, sand, and dust. In addition, the unit is
2-62