NavCom SF-3050 Rev.B - Manual (Page 124)

SF-3050 User Guide – Rev B
6-122
external power cable without a filter (P/N 94-310262-
3010LF). Later SF-3050 production units are supplied
with an external power cable with a filter
(P/N 94-310274-3010LF)
The power cable must be connected to the chosen
external power solution in accordance with Chapter 3
Interfacing/Electrical Power. It is important that the
external power source allow sufficient current draw
for proper operation. Insufficient supplied current will
cause damage to your external power source.
If your chosen external power source is a disposable
battery, please dispose of the battery in accordance
with your local regulations.
Safety First
The owner of this equipment must ensure that all
users are properly trained prior to using the
equipment and are aware of the potential hazards
and how to avoid them.
Other manufacturer’s equipment must be used in
accordance with the safety instructions issued by that
manufacturer. This includes other manufacturer’s
equipment that may be attached to NavCom
Technology, Inc. manufactured equipment.
Always use the equipment in accordance with local
regulatory practices for safety and health at work.
There are no user serviceable parts inside the
SF-3050 GNSS sensor. Accessing the inside of the
equipment will void the equipment warranty.
Take care to ensure the SF-3050 does not come into
contact with electrical power installations, the unit is
securely fastened and there is protection against
electromagnetic discharge in accordance with local
regulations.