NavCom SF-3050 Rev.B - Manual (Page 34)

SF-3050 User Guide – Rev B
1-32
28. Select the appropriate firmware file.
Upload Boot files before applicati
files if both types require updating. on
Example Boot File: SP_boot2_ver1,0,4.s19
,0,4.s19

SPv + version number.s19
Example NAV File: SPv1,0
The format of the NAV firmware file is:
Figure 16: Settings for GNSS Firmware
number].s19
29. Se
• Baud Rate:
t these options:
• DB9S cable: 57600 (required)
• USB 2.0 Device Cable: No selection is
necessary (automatic connection speed)
get:
• Tar
• Select SOLARIS to upload GNSS
firmware (see Figure 16):
SP_boot1_[version number].s19
SP_boot2_[version number].s19
SPv[version number].s19
Or
ect SOLARIS PIO to upload PWRIO
•
firmware (see
Sel
Figure 17):
SP_PWRIOboot1_[version number].s19
SP_PWRIO_[version