NavCom SF-3050 Rev.B User Manual
Page 155
SF-3050 User Guide – Rev B
C-153
for other NavCom receivers.
StarFire subscriptions can be purchased for quarterly,
biannual or annual periods and are available via a
NavCom authorized representative, or by contacting
An authorized subscription will provide an encrypted
keyword, which is specific to the Serial Number of the
NavCom receiver to be authorized. This is entered
into the receiver using the provided controller
solution.
For the SF-3050 receiver only, the initial StarFire
license and StarFire Software Option are installed by
an authorized dealer or the user.
Former NavCom receivers were delivered with the
initial StarFire license preinstalled at the factory, and
subsequent licenses were installed by the user.
NavCom’s order fulfillment center has changed,
necessitating a change in initial license installation as
detailed above.
For the SF-3050 receiver only, subsequent renewals
of the license can be transmitted to the receiver via
satellite.
The only piece of equipment needed to use the
StarFire system is a StarFire receiver. NavCom offers
a variety of receivers configured for different
applications. Details of all the StarFire receivers are
available from the NavCom authorized local
representative or the NavCom website at:
StarFire receivers include a multi-frequency GNSS
receiver and an L-Band receiver integrated into a
single unit to provide the exceptional precise
positioning capability of the StarFire Network,
anywhere, anytime.