NavCom SF-3050 Rev.B - Manual (Page 126)

SF-3050 User Guide – Rev B
 Minimal data latency
 2 GB of internal memory 1
 NavCom Ultra Compact RTK format, RTCM 2.3
and 3.0 (code & carrier), and CMR/CMR+.
 Output NMEA 0183, NavCom Binary, NavCom
ASCII formats
 Configurable as RTK base or rover
 RTK
Extend
 Programmable output rates
 Event Marker input
 1PPS
Output
 Communications Ports: RS-232, RS-422,
USB 2.0 (Device & Host), Bluetooth, & Ethernet
Performance
SF-3050 performance is dependant on location,
satellite geometry, atmospheric condition and GNSS
correction.
Tracking Characteristics
The SF-3050 engine has 67 signal channels with the
required flexibility to track all civilian GNSS and SBAS
signals. The SF-3050 engine is also capable of
tracking the code and carrier from all GNSS signals.

L5 and G2 are not available simultaneously
due to hardware resource sharing. Select a
signal according to these environmental
considerations:
• Shade: G2 provides the best results, though
positioning is less accurate in shade.
• Open Sky: L5 provides the best
positioning accuracy.
A-124
1
Not supported in v1.0 software