NavCom SF-3050 Rev.B - Manual (Page 95)

SF-3050 User Guide – Rev B
5. Click the Properties button. The Internet Protocol
window opens.
6. Select the option, Use the following IP address
(see Figure 60).
Figure 60: Internet Protocol Window
7. Enter the IP address for the PC. In this case, enter
192.168.0.100

The first part of the IP address, 192.168.0,
is the same for both the SF-3050 and the
PC. The last part of the IP address must
be unique for every device. In this case, it
is 100 for the PC.
8. Press the Tab button on the keyboard. The Subnet
mask is automatically populated.
9. Click the OK button in this window and also in the
Local Area Connection window.
10. Continue to the next section for connection
instructions.
3-93