NavCom SF-3050 Rev.B - Manual (Page 32)

SF-3050 User Guide – Rev B
1-30
Figure 11: Input Terminal – Firmware Versions
Upload Firmware
The required PC Baud rate to upload
firmware via the supplied DB9S cable
(RS-232) on COM2 is 57600 (default). This
requirement does not apply to the supplied
USB 2.0 Device cable.

The receiver must be navigating at the
time of the firmware upload.
Typically, if any firmware needs to be
updated, it is NAV and PIOAPP.
23. Locate the File Upload window on the Receiver
Options tab (see Figure 12).