NavCom SF-3050 Rev.E - Manual (Page 124)

SF-3050 Product User Guide
– Rev E
3-98
Figure 68: Ethernet Port Configuration
4. Click the Connect button.
5. Verify that the SF-3050 is connected to the PC.
Messages scrolling in the Communication window
indicate that the connection is established (see
Figure 5).

If an Ethernet connection is not
established, use StarUtil 3000 to verify
the IP address of the SF-3050. A serial
connection must be used to determine
the
receiver‟s IP address.
Event
The SF-3050 accepts an event input pulse to
synchronize external incidents requiring precise
GNSS time tagging, such as aerial photography. For